SF1056A 110.592 mhz saw filter rf monolithics, inc. phone: +1(972 )233-2903 european sales office 4347 sigma road fax: +1(972 )387-8148 4 4 1 9 63 25 1 3 83 dallas, texas 75244 e-mail: info@rfm.com 44 19 63 25 1 51 0 usa home page : www.rfm.com SF1056A 8 / 23 /1999 r electrical connections connection terminals port 1 hot 2 port 1 gnd return 3 port 2 hot 8 port 2 gnd return 9 case ground all others absolute maximum ratings rating value units maximum incident power in passband +10 dbm max . dc voltage between any 2 terminals 30 vdc storage temperature range -40 to +85 c max soldering profile 265 c for 10 s designed for dect and wlan if applications low insertion loss excellent size-to-performance ratio hermetic 13.3 x 6.5 mm surface-mount case unbalanced input and output characteristic sym min typ max units notes nominal center frequency fc 110.592 mhz il 8.5 10.0 db 1 bw 3 576 750 khz passband insertion loss at fc 3 db passband group delay variation over fc 576 khz gdv <150 200 ns p-p 1, 2 28 40 40 >45 rejection fc-3.4 to fc-1.728 and fc+1.728 to fc+3.4 mhz dc to fc -3.4 and fc +3.4 to 200 mhz ultimate 45 db 1, 2, 3 operating temperature range t a -10 +60 c 1 i mpedance matching to 50 w unbalanced external l-c case style sm13365-12 13.3 x 6.5 mm nominal footprint lid symbolization (yy = year, ww = week) see note 4 rfm SF1056A yyww notes: 1. unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 w and measured with 50 w network analyzer. 2. unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. 3. rejection is measured as attenuation below the minimum il point in the passband. rejection in final user application is dependent on pcb layout and external impedance matchin g design. see application note no. 42 for details. 4. ?lrip? or ?l? after the part number indicates ?low rate initial production? and ?eng? or ?e? indicates ?engineering prototypes.? 5. the design, manufacturing process, and specifications of this filter are subject to change. 6. either port 1 or port 2 may be used for either input or output in the design. however, impedances and impedance matching may vary between port 1 and port 2, so that the filter must always be installed in one direction per the circuit design. 7. us and international patents may apply. 8. rfm, stylized rfm logo, and rf monolithics, inc. are registered trademarks of rf monolithics, inc. 9. ? copyright 1999, rf monolithics inc . 10. electrostatic sensitive device. observe precautions for handling.
SF1056A 110.592 mhz saw filter rf monolithics, inc. phone: +1(972)233-2903 european sales office 4347 sigma road fax: +1(972)387-8148 44 1963 251383 dallas, texas 75244 e-mail: info@rfm.com 44 1963 251510 usa home page : www.rfm.com SF1056Ap 300 khz/div 20 ns/div 0 db -20 -40 -60 -80 -100 0 db -2 -4 -6 -8 -10 1 mhz/div
rf monolithics, inc. phone: +1(972) 233-2903 fax: +1(972) 387-8148 e-mail: info@rfm.com rfm europe phone: 44 1963 251383 fax: 44 1963 251510 http://www.rfm.com ?1999 by rf monolithics, inc. the stylized rfm logo and rfm are registered trademarks of rf monolithics, inc. sm13365-12 052400 sm13365-12 case dimension mm inches min nom max min nom max a 13.08 13.31 13.60 0.515 0.524 0.535 b 6.27 6.50 6.80 0.247 0.256 0.268 c 1.91 2.00 0.075 0.079 d 1.50 0.059 e 0.79 0.031 h 1.0 0.039 p 2.54 0.100 connection terminals port 1 input or return 2 return or input 3 port 2 output or return 8 return or output 9 ground all others single ended operation return is ground differential operation return is hot 12-terminal ceramic surface-mount case 13.3 x 6.5 mm nominal footprint c h p (8 places) e (10 places) d b a 4 5 6 7 1 12 11 10 3 9 8 2 top view bottom view 2 3 8 9 1 12 11 10 4 5 6 7 electrical connections case dimensions
2u874 scale sheet of a fscm no. size dwg no. rev none w/o or ecn SF1056A-demo a 1 2 7202 p ar t identifier description 1 description 2 qty/assy reference description SF1056A-demo demo board, SF1056A SF1056A-000 assy digram, demo board SF1056A 0 400-0735-001 pcb, demo board, 13.3 x 6.5 1.0000 pcb1 500-0003-750 cap ,chip, npo, 75 (j), std 1.0000 c 1 500-0003-560 cap, chip, npo, 56 (j), std 1.0000 c 2 500-0010-470 ind, chip, 1008cs, 47 nh, 10% 1.0000 l 1 500-0010-680 ind, chip, 1008cs, 68 nh, 10% 1.0000 l 2 500-0248-001 conn,coax,flange mt.jack 4 hole 2.0000 j 1,2 bill of materials
2u874 scale sheet of a fscm no. size dwg no. rev none w/o or ecn SF1056A-demo a 2 2 7202 rev ecn date description a 7202 12/07/98 initial release rev history
|
